technical data sheet fmc right angle plug 16S201-270L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to n/a documents assembly instruction 16 a material and plating connector parts material plating center contact brass gold, min. 0.15 m, over chemical nickel outer contact beryllium copper gold, min. 0.15 m, over chemical nickel dielectric ptfe
technical data sheet fmc right angle plug 16S201-270L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 electrical data impedance 50 ? frequency dc to 10 ghz return loss ? 23 db, dc to 5 ghz ? 20 db, 5 to 10 ghz insertion loss ? 0.1 db x [ghz] f insulation resistance ? 5 x10 3 m ? center contact resistance ? 6 m ? outer contact resistance ? 2 m ? test voltage 500 v rms working voltage 335 v rms rf-leakage ? -80 db up to 3 ghz ? -65 db up to 10 ghz contact current 1.2 a dc max. - limitations are possible due to the used cable type - mechanical data mating cycles min. 100 engagement force smooth bore 9 n max. limited detent 45 n max. full detent 68 n max. disengagement force smooth bore 2.2 n min. limited detent 9 n min. full detent 22 n min. environmental data temperature range -40 c to +105 c rapid change of temperature iec 60169-1 clause 16.4 (-40 c to +105 c) mixed flowing gas din en 60068-2-60 meth. 4 (10 d) vibration iec 61169-1 clause 9.3.3 (10-2000 hz; 15 g) shock iec 60169-1 clause 15.8 (50g 11 ms half-sine) damp heat iec 60169-1 clause 16.3 (+40 c 56 d) 2002/95/ec (rohs) compliant suitable cables ut 47 weight weight 0.36 g/pce draft date approved date rev. engineering change number name date andreas fellner 07.07.05 sa. krautenbacher 11.03.14 d00 14-0352 t. krojer 11.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommendation to infringe existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|